1. Wash, rinse and dry your hands thoroughly before handling your lenses.
2. Open the basket of your barrel case marked "R" and place your right lens on the dome of the central holder. Ensure the lens does not overlap the spokes of the holder and does not become pinched when the basket is closed. Close the basket.
3. Repeat with your left lens in the other basket marked "»"
4. Fill the barrel case up to the marked line with your Multifunction solution. Do not over fill the lens case. It is important that you do not pour your Multifunction solution into the barrel case until your lenses have been placed into each basket. This will ensure that the neutralization process does not begin before the lenses are immersed in solution.
5. Place the lens holder into the barrel case and close securely, taking care not to over tighten the cap.
6. Allow your lenses to soak for at least 6 hours or overnight ensuring that the barrel case is in an upright position and that the lenses are fully immersed in the Multifunction solution.
7. After a period of at least 6 hours, your lenses may be removed from the barrel case and worn.
8. Always discard the remaining solution from the barrel case.
9. Rinse the barrel case thoroughly with un-preserved sterile saline and leave it open to air dry.
If lenses are to be worn for extensive periods without replacement, a separate, daily cleaner may be required. Consult your contact lens practitioner.
The weekly use of triple action enzyme tablets may be necessary for some patients, please consult your contact lens practitioner.
Dermo-cosmetics
